Prior to scheduling of final Building inspection, the following must have been completed:

• Water connection fees must be paid.
• Utility account must be signed for at Riverton City Offices at 12830 S. Redwood Road in the Utility Billing Department.
• Water meter must be set. Following are five reasons the water meter cannot be set on the first try:
  • Meter lid must be 1” above grade
  • Setter depth must be between 18” – 24”. No deeper, no shallower
  • No damage to the lid, ring or barrel
  • No debris in the barrel
  • Remove jumper prior to meter installation

Secondary Water System:

• Stop and waste valve accessible and operational – 1” above grade
• Green control box at 1” above grade
• Ball valve (inside green box) operational and accessible
• No damage to valve boxes or green boxes

The following will be completed after the final building inspection has been passed:

• Water services must be installed to Riverton City Standards
• The garbage container/recycling bins will be ordered and will take approximately 10-15 business days to be delivered.
• Please read over the information to make sure all items are completed before scheduling a meter set.
• Riverton City staff will contact Rocky Mountain Power for power clearance. The resident must have an account set up with Rocky Mountain Power.

Effective July 1, 2006

A fee of $50.00 will be assessed each time the inspector is called out after the 2^nd attempt.

If there are any questions regarding the above, call Utility Billing at (801) 208-3146.